Simply push the lever with your toothbrush to dispense toothpaste.
The main body can be disassembled and washed with water.
No batteries required, making it eco-friendly and economical!

Specifications:
Compatible sizes: Please see the product image for more details.
Materials: PP, ABS, TPR
Toothpaste tubes with non-removable caps cannot be used.

Installation Method:
1. Wipe off any dirt from the surface on which you will be installing the product and allow it to dry.
2. Peel off the film on the back of the hook and stick it on the wall while squeezing out the air. Make sure the hooks are firmly attached.
3. Insert the toothpaste tube into the opening on the top of the device and push it in while twisting it. Press the tube lightly to remove any air inside.
4. Slide the unit from top to bottom onto the hook attached to the wall.
*The way the hooks are attached may vary depending on the surface paint, strength and condition of the wall, and there is a risk of them falling off.
*Check periodically to make sure the adhesive strength of the hooks has not decreased.
*The adhesive sticker is quite strong, and depending on where it is applied, it may be difficult to remove. Also, please be aware that when removing the adhesive sticker, it may damage the underlying surface or leave a mark.

Placement of a toothbrush:
If you press the lever against the top, a small amount will be squeezed out, and if you press the lever against the bottom, a larger amount will be squeezed out.
Please see the product image for more details.

Disassembly and maintenance instructions:
* Maintenance should be performed by an adult, taking care to avoid injury.
1. Remove the main unit from the hook and remove the front cover.
2. Remove the lever by pushing it towards the center.
3. Slide the pump part toward you to remove it.
4. Wash with water or lukewarm water.
5. Wipe off any moisture and dry thoroughly, then reassemble the product in the reverse order of disassembly and use it again.


How to replace the tube:
1. Remove the main unit from the hook.
2. Remove the tube by turning it, and then follow the installation steps from step 3 onwards.


Handling Precautions:
●Do not use highly acidic or alkaline chemicals.
●Do not use products that contain terpenes found in citrus peels or oils and fats. Doing so may cause damage.
●The amount and condition of the product will change as the contents become low. 
●A large impact may cause the product to fall, resulting in injury or damage.
●Leaving the product attached for a long period of time may mold, slime, and discoloration may occur on the wall surface, hook, and back of the unit. Please remove the unit periodically and clean the installation surface and the unit.
●When placing the container, do not scrub it with polishing powder, cleanser, scrubbing brushes, or other hard objects. Doing so may cause scratches and make it more susceptible to dirt.

Export from Japan
Made in China